INA231AIYFFR Current and Power Monitors and Regulators Hi or Lo-Side Msmt Bidirect CRNT PWR MN
♠ Product Description
| Product Attribute | Attribute Value |
| Manufacturer: | Texas Instruments |
| Product Category: | Current & Power Monitors & Regulators |
| RoHS: | Details |
| Product: | Current and Power Monitors |
| Sensing Method: | High or Low Side |
| Supply Voltage - Max: | 5.5 V |
| Supply Voltage - Min: | 2.7 V |
| Operating Supply Current: | 420 uA |
| Accuracy: | 0.5 % |
| Minimum Operating Temperature: | - 40 C |
| Maximum Operating Temperature: | + 125 C |
| Mounting Style: | SMD/SMT |
| Package/Case: | DSBGA-12 |
| Packaging: | Reel |
| Packaging: | Cut Tape |
| Packaging: | MouseReel |
| Bandwidth: | 7 kHz |
| Brand: | Texas Instruments |
| Features: | Alert Function, Bi-directional, Low-side Capable |
| Input Voltage Range: | 0 V to 28 V |
| Operating Supply Voltage: | 2.7 V to 5.5 V |
| Product Type: | Current & Power Monitors & Regulators |
| Series: | INA231 |
| Factory Pack Quantity: | 3000 |
| Subcategory: | PMIC - Power Management ICs |
| Vos - Input Offset Voltage: | 50 uV |
| Part # Aliases: | HPA02149AIYFFR |
| Unit Weight: | 2.600 mg |
♠INA231 28-V, 16-Bit, I2C Output Current, Voltage and Power Monitor With Alert in WCSP Package
The INA231 is a current-shunt and power monitor with a 1.8-V compliant I2C interface that features 16 programmable addresses. The INA231 monitors both shunt voltage drops and bus supply voltage, providing increased protection by asserting the ALERT pin if the values are outside the programmed range. Programmable calibration value, conversion time, and averaging, combined with an internal multiplier, enable direct readouts of current in amperes and power in watts, thus reducing host processing.
The INA231 senses current on bus voltages that vary from 0 V to 28 V, with the device powered from a single 2.7-V to 5.5-V supply, drawing 330 μA (typical) of supply current.
The INA231 is specified over the operating temperature range of –40°C to +125°C. The INA231 is available in two versions: the INA231A starts up performing continuous conversions of the shunt and bus voltage, whereas the INA231B starts up in low-current, power-down mode.
• Bus voltage sensing from 0 V to 28 V
• High- or low-side sensing
• Current, voltage, and power reporting
• High accuracy: – Gain error: 0.5% (maximum) – Offset: 50 μV (maximum)
• Configurable averaging options
• Programmable alert threshold
• 1.8-V I2C compliant
• Power-supply operation: 2.7 V to 5.5 V
• Start-up mode options: – INA231A: active conversion – INA231B: low-current power down
• Smartphones • Tablets
• Servers • Computers
• Power management
• Battery chargers
• Power supplies
• Test equipment
