NC7SB3157P6X Analog Switch ICs Low Voltage UHS SPDT Analog Switch
♠ Product Description
| Product Attribute | Attribute Value |
| Manufacturer: | onsemi |
| Product Category: | Analog Switch ICs |
| RoHS: | Details |
| Mounting Style: | SMD/SMT |
| Package / Case: | SC-70-6 |
| Number of Channels: | 1 Channel |
| Configuration: | 1 x SPDT |
| On Resistance - Max: | 7 Ohms |
| Supply Voltage - Min: | 1.65 V |
| Supply Voltage - Max: | 5.5 V |
| Minimum Dual Supply Voltage: | - |
| Maximum Dual Supply Voltage: | - |
| On Time - Max: | 5.2 ns |
| Off Time - Max: | 3.5 ns |
| Minimum Operating Temperature: | - 40 C |
| Maximum Operating Temperature: | + 85 C |
| Series: | NC7SB3157 |
| Packaging: | Reel |
| Packaging: | Cut Tape |
| Packaging: | MouseReel |
| Brand: | onsemi / Fairchild |
| Height: | 1 mm |
| Length: | 2 mm |
| Pd - Power Dissipation: | 180 mW |
| Product Type: | Analog Switch ICs |
| Factory Pack Quantity: | 3000 |
| Subcategory: | Switch ICs |
| Supply Current - Max: | 1 uA |
| Supply Type: | Single Supply |
| Width: | 1.25 mm |
| Part # Aliases: | NC7SB3157P6X_NL |
| Unit Weight: | 0.000988 oz |
♠Low-Voltage SPDT Analog Switch or 2:1Multiplexer / De-multiplexer Bus Switch NC7SB3157, FSA3157
The NC7SB3157 / FSA3157 is a high−performance, single−pole / double−throw (SPDT) analog switch or 2:1 multiplexer / de−multiplexer bus switch.
The device is fabricated with advanced sub−micron CMOS technology to achieve high−speed enable and disable times and low on resistance. The break−before−make select circuitry prevents disruption of signals on the B Port due to both switches temporarily being enabled during select pin switching. The device is specified to operate over the 1.65 to 5.5 V VCC operating range. The control input tolerates voltages up to 5.5 V, independent of the VCC operating range.
• Useful in Both Analog and Digital Applications
• Space−Saving, SC70 6−Lead Surface Mount Package
• Ultra−Small, MicroPak Leadless Package
• Low On Resistance: < 10 on Typical at 3.3 V VCC
• Broad VCC Operating Range: 1.65 V to 5.5 V
• Rail−to−Rail Signal Handling
• Power−Down, High−Impedance Control Input
• Over−Voltage Tolerance of Control Input to 7.0 V
• Break−Before−Make Enable Circuitry
• 250 MHz, 3 dB Bandwidth
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant
