STM32F051R8T6 ARM Microcontrollers MCU 32Bit ARM Cortex M0 64 Kbytes 2 – 3.6V
♠ Product Description
| Product Attribute | Attribute Value |
| Manufacturer: | Vishay |
| Product Category: | MOSFET |
| RoHS: | Details |
| Technology: | Si |
| Mounting Style: | SMD/SMT |
| Package / Case: | TSOP-6 |
| Transistor Polarity: | P-Channel |
| Number of Channels: | 1 Channel |
| Vds - Drain-Source Breakdown Voltage: | 30 V |
| Id - Continuous Drain Current: | 8 A |
| Rds On - Drain-Source Resistance: | 36 mOhms |
| Vgs - Gate-Source Voltage: | - 20 V, + 20 V |
| Vgs th - Gate-Source Threshold Voltage: | 3 V |
| Qg - Gate Charge: | 50 nC |
| Minimum Operating Temperature: | - 55 C |
| Maximum Operating Temperature: | + 150 C |
| Pd - Power Dissipation: | 4.2 W |
| Channel Mode: | Enhancement |
| Tradename: | TrenchFET |
| Series: | SI3 |
| Packaging: | Reel |
| Packaging: | Cut Tape |
| Packaging: | MouseReel |
| Brand: | Vishay Semiconductors |
| Configuration: | Single |
| Height: | 1.1 mm |
| Length: | 3.05 mm |
| Product Type: | MOSFET |
| Factory Pack Quantity: | 3000 |
| Subcategory: | MOSFETs |
| Width: | 1.65 mm |
| Unit Weight: | 0.000705 oz |
• Core: ARM® 32-bit Cortex®-M0 CPU, frequency up to 48 MHz
• Memories
– 16 to 64 Kbytes of Flash memory
– 8 Kbytes of SRAM with HW parity checking
• CRC calculation unit
• Reset and power management
– Digital and I/O supply: VDD = 2.0 V to 3.6 V
– Analog supply: VDDA = from VDD to 3.6 V
– Power-on/Power down reset (POR/PDR)
– Programmable voltage detector (PVD)
– Low power modes: Sleep, Stop, Standby
– VBAT supply for RTC and backup registers
• Clock management
– 4 to 32 MHz crystal oscillator
– 32 kHz oscillator for RTC with calibration
– Internal 8 MHz RC with x6 PLL option
– Internal 40 kHz RC oscillator
• Up to 55 fast I/Os
– All mappable on external interrupt vectors
– Up to 36 I/Os with 5 V tolerant capability
• 5-channel DMA controller
• One 12-bit, 1.0 µs ADC (up to 16 channels)
– Conversion range: 0 to 3.6 V
– Separate analog supply from 2.4 up to 3.6
• One 12-bit DAC channel
• Two fast low-power analog comparators with programmable input and output
• Up to 18 capacitive sensing channels supporting touchkey, linear and rotary touch sensors
• Up to 11 timers
– One 16-bit 7-channel advanced-control timer for 6 channels PWM output, with deadtime generation and emergency stop
– One 32-bit and one 16-bit timer, with up to 4 IC/OC, usable for IR control decoding
– One 16-bit timer, with 2 IC/OC, 1 OCN, deadtime generation and emergency stop
– Two 16-bit timers, each with IC/OC and OCN, deadtime generation, emergency stop and modulator gate for IR control
– One 16-bit timer with 1 IC/OC
– Independent and system watchdog timers
– SysTick timer: 24-bit downcounter
– One 16-bit basic timer to drive the DAC
• Calendar RTC with alarm and periodic wakeup from Stop/Standby
• Communication interfaces
– Up to two I2C interfaces, one supporting Fast Mode Plus (1 Mbit/s) with 20 mA current sink, SMBus/PMBus and wakeup from Stop mode
– Up to two USARTs supporting master synchronous SPI and modem control, one with ISO7816 interface, LIN, IrDA capability, auto baud rate detection and
wakeup feature
– Up to two SPIs (18 Mbit/s) with 4 to 16 programmable bit frame, one with I2S
interface multiplexed
• HDMI CEC interface, wakeup on header reception
• Serial wire debug (SWD)
• 96-bit unique ID
• All packages ECOPACK®2
