STM32F101VFT6TR ARM Microcontrollers – MCU 32BIT ARM Cortex M3 Access Line 768kB
♠ Product Description
| Product Attribute | Attribute Value |
| Manufacturer: | STMicroelectronics |
| Product Category: | ARM Microcontrollers - MCU |
| RoHS: | Details |
| Series: | STM32F101VF |
| Mounting Style: | SMD/SMT |
| Package / Case: | LQFP-100 |
| Core: | ARM Cortex M3 |
| Program Memory Size: | 768 kB |
| Data Bus Width: | 32 bit |
| Maximum Clock Frequency: | 36 MHz |
| Number of I/Os: | 112 I/O |
| Data RAM Size: | 80 kB |
| Supply Voltage - Min: | 2 V |
| Supply Voltage - Max: | 3.6 V |
| Minimum Operating Temperature: | - 40 C |
| Maximum Operating Temperature: | + 85 C |
| Packaging: | Reel |
| Brand: | STMicroelectronics |
| Data RAM Type: | SRAM |
| Interface Type: | I2C, SPI, UART |
| Moisture Sensitive: | Yes |
| Number of Timers/Counters: | 15 Timer |
| Processor Series: | ARM Cortex M |
| Product Type: | ARM Microcontrollers - MCU |
| Program Memory Type: | Flash |
| Factory Pack Quantity: | 1000 |
| Subcategory: | Microcontrollers - MCU |
| Tradename: | STM32 |
| Unit Weight: | 0.046530 oz |
♠ XL-density access line, ARM®-based 32-bit MCU with 768 KB to 1 MB Flash, 15 timers, 1 ADC and 10 communication interfaces
The STM32F101xF and STM32F101xG access line family incorporates the high-performance ARM® Cortex®-M3 32-bit RISC core operating at a 36 MHz frequency, high-speed embedded memories (Flash memory up to 1 Mbyte and SRAM of 80 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer one 12-bit ADC, ten general-purpose 16-bit timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs and five USARTs.
The STM32F101xx XL-density access line family operates in the –40 to +85 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.
These features make the STM32F101xx XL-density access line microcontroller family suitable for a wide range of applications such as medical and handheld equipment, PC peripherals and gaming, GPS platforms, industrial applications, PLC, printers, scanners alarm systems , power meters, and video intercom.
• Core: ARM® 32-bit Cortex®-M3 CPU with MPU
– 36 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance
– Single-cycle multiplication and hardware division
• Memories
– 768 Kbytes to 1 Mbyte of Flash memory (dual bank with read-while-write capability)
– 80 Kbytes of SRAM
– Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
– LCD parallel interface, 8080/6800 modes
• Clock, reset and supply management
– 2.0 to 3.6 V application supply and I/Os
– POR, PDR, and programmable voltage detector (PVD)
– 4-to-16 MHz crystal oscillator
– Internal 8 MHz factory-trimmed RC
– Internal 40 kHz RC with calibration capability
– 32 kHz oscillator for RTC with calibration
• Low power
– Sleep, Stop and Standby modes
– VBAT supply for RTC and backup registers
• 1 x 12-bit, 1 µs A/D converters (up to 16 channels)
– Conversion range: 0 to 3.6 V
– Temperature sensor
• 2 × 12-bit D/A converters
• DMA
– 12-channel DMA controller
– Peripherals supported: timers, ADC, DAC, SPIs, I2Cs and USARTs
• Up to 112 fast I/O ports
– 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
• Debug mode
– Serial wire debug (SWD) & JTAG interfaces
– Cortex-M3 Embedded Trace Macrocell™
• Up to 15 timers
– Up to ten 16-bit timers, with up to 4 IC/OC/PWM or pulse counters
– 2 × watchdog timers (Independent and Window)
– SysTick timer: a 24-bit downcounter
– 2 × 16-bit basic timers to drive the DAC
• Up to 10 communication interfaces
– Up to 2 x I2C interfaces (SM7816 interface, LIN, IrDA capability, modem control)
– Up to 3 SPIs (18 Mbit/s)
• CRC calculation unit, 96-bit unique ID
• ECOPACK® packages
