TLV9061IDPWR Operational Amplifiers Industry’s smallest 10MHz RRIO 1.8V-5.5V operational amplifier 5-X2SON
♠ Product Description
| Product Attribute | Attribute Value |
| Manufacturer: | Texas Instruments |
| Product Category: | Operational Amplifiers - Op Amps |
| RoHS: | Details |
| Mounting Style: | SMD/SMT |
| Package / Case: | X2SON-5 |
| Number of Channels: | 1 Channel |
| Supply Voltage - Max: | 5.5 V |
| GBP - Gain Bandwidth Product: | 10 MHz |
| Output Current per Channel: | 50 mA |
| SR - Slew Rate: | 6.5 V/us |
| Vos - Input Offset Voltage: | 1.6 mV |
| Supply Voltage - Min: | 1.8 V |
| Minimum Operating Temperature: | - 40 C |
| Maximum Operating Temperature: | + 125 C |
| Ib - Input Bias Current: | 500 fA |
| Operating Supply Current: | 538 uA |
| Shutdown: | Shutdown |
| CMRR - Common Mode Rejection Ratio: | 103 dB |
| en - Input Voltage Noise Density: | 16 nV/sqrt Hz |
| Series: | TLV9061 |
| Packaging: | Reel |
| Packaging: | Cut Tape |
| Packaging: | MouseReel |
| 3 dB Bandwidth: | 80 kHz |
| Amplifier Type: | CMOS |
| Brand: | Texas Instruments |
| Features: | Cost Optimized, EMI Hardened, Small Size |
| In - Input Noise Current Density: | 23 fA/sqrt Hz |
| Input Type: | Rail-to-Rail |
| Ios - Input Offset Current: | 0.05 pA |
| Moisture Sensitive: | Yes |
| Output Type: | Rail-to-Rail |
| Product: | Operational Amplifiers |
| Product Type: | Op Amps - Operational Amplifiers |
| Factory Pack Quantity: | 3000 |
| Subcategory: | Amplifier ICs |
| THD plus Noise: | 0.0008 % |
| Unit Weight: | 0.000025 oz |
♠ TLV906xS 10-MHz, RRIO, CMOS Operational Amplifiers for Cost-Sensitive Systems
The TLV9061 (single), TLV9062 (dual), and TLV9064 (quad) are single-, dual-, and quad- low-voltage (1.8 V to 5.5 V) operational amplifiers (op amps) with railto-rail input- and output-swing capabilities. These devices are highly cost-effective solutions for applications where low-voltage operation, a small footprint, and high capacitive load drive are required. Although the capacitive load drive of the TLV906x is 100 pF, the resistive open-loop output impedance makes stabilizing with higher capacitive loads simpler. These op amps are designed specifically for low-voltage operation (1.8 V to 5.5 V) with performance specifications similar to the OPAx316 and TLVx316 devices.
• Rail-to-rail input and output
• Low input offset voltage: ±0.3 mV
• Unity-gain bandwidth: 10 MHz
• Low broadband noise: 10 nV/√Hz
• Low input bias current: 0.5 pA
• Low quiescent current: 538 µA
• Unity-gain stable
• Internal RFI and EMI filter
• Operational at supply voltages as low as 1.8 V
• Easier to stabilize with higher capacitive load due to resistive open-loop output impedance
• Shutdown version: TLV906xS
• Extended temperature range: –40°C to 125°C
• E-bikes
• Smoke detectors
• HVAC: heating, ventilating, and air conditioning
• Motor control: AC induction
• Refrigerators
• Wearable devices
• Laptop computers
• Washing machines
• Sensor signal conditioning
• Power modules
• Barcode scanners
• Active filters
• Low-side current sensing
