TS271CDT Operational Amplifiers – Op Amps Single Lo-Power Prog
♠ Product Description
| Product Attribute | Attribute Value |
| Manufacturer: | STMicroelectronics |
| Product Category: | Operational Amplifiers - Op Amps |
| RoHS: | Details |
| Mounting Style: | SMD/SMT |
| Package / Case: | SOIC-8 |
| Number of Channels: | 1 Channel |
| Supply Voltage - Max: | 16 V, +/- 8 V |
| GBP - Gain Bandwidth Product: | 100 kHz |
| Output Current per Channel: | 60 mA |
| SR - Slew Rate: | 40 mV/us |
| Vos - Input Offset Voltage: | 10 mV |
| Supply Voltage - Min: | 3 V, +/- 1.5 V |
| Minimum Operating Temperature: | 0 C |
| Maximum Operating Temperature: | + 70 C |
| Ib - Input Bias Current: | 150 pA |
| Operating Supply Current: | 15 uA |
| Shutdown: | No Shutdown |
| CMRR - Common Mode Rejection Ratio: | 60 dB |
| en - Input Voltage Noise Density: | 30 nV/sqrt Hz |
| Series: | TS271 |
| Packaging: | Reel |
| Packaging: | Cut Tape |
| Packaging: | MouseReel |
| Amplifier Type: | Low Power Amplifier |
| Brand: | STMicroelectronics |
| Dual Supply Voltage: | +/- 3 V, +/- 5 V |
| Height: | 1.65 mm (Max) |
| Input Type: | Differential |
| Ios - Input Offset Current: | 1 pA |
| Length: | 5 mm (Max) |
| Maximum Dual Supply Voltage: | +/- 8 V |
| Minimum Dual Supply Voltage: | +/- 1.5 V |
| Operating Supply Voltage: | 3 V to 16 V, +/- 1.5 V to +/- 8 V |
| Product: | Operational Amplifiers |
| Product Type: | Op Amps - Operational Amplifiers |
| Factory Pack Quantity: | 2500 |
| Subcategory: | Amplifier ICs |
| Supply Type: | Single, Dual |
| Technology: | CMOS |
| Voltage Gain dB: | 100 dB |
| Width: | 4 mm (Max) |
| Unit Weight: | 0.017870 oz |
♠ CMOS Programmable Low Power Single Operational Amplifier
The TS271 is a low cost, low power single operational amplifier designed to operate with single or dual supplies. This operational amplifier uses the ST silicon gate CMOS process giving it an excellent consumption-speed ratio. This amplifier is ideally suited for low consumption applications.
The power supply is externally programmable with a resistor connected between pins 8 and 4. It allows to choose the best consumption-speed ratio and supply current can be minimized according to the required speed. This device is specified for the following ISET current values: 1.5µA, 25µA, 130µA.
■ Offset null capability (by external compensation)
■ Dynamic characteristics adjustable ISET
■ Consumption current and dynamic parameters are stable regarding the voltage power supply variations
■ Output voltage can swing to ground
■ Very large ISET range
■ Stable and low offset voltage
■ Three input offset voltage selections
