VN7007AHTR Gate Drivers High side driver current sense analog feedback for automotive applications
♠ Product Description
| Product Attribute | Attribute Value |
| Manufacturer: | STMicroelectronics |
| Product Category: | Gate Drivers |
| RoHS: | Details |
| Product: | MOSFET Gate Drivers |
| Type: | High-Side |
| Mounting Style: | SMD/SMT |
| Package/Case: | Octapak-7 |
| Number of Drivers: | 1 Driver |
| Number of Outputs: | 1 Output |
| Output Current: | 6 A |
| Supply Voltage - Min: | 4 V |
| Supply Voltage - Max: | 28 V |
| Minimum Operating Temperature: | - 40 C |
| Maximum Operating Temperature: | + 150 C |
| Series: | VN7007AH |
| Qualification: | AEC-Q100 |
| Packaging: | Reel |
| Packaging: | Cut Tape |
| Packaging: | MouseReel |
| Brand: | STMicroelectronics |
| Maximum Turn-Off Delay Time: | 100 us |
| Maximum Turn-On Delay Time: | 120 us |
| Moisture Sensitive: | Yes |
| Off Time - Max: | 100 us |
| Operating Supply Current: | 3 mA |
| Operating Supply Voltage: | 4 V to 28 V |
| Pd - Power Dissipation: | - |
| Product Type: | Gate Drivers |
| Rds On - Drain-Source Resistance: | 7 mOhms |
| Shutdown: | Shutdown |
| Factory Pack Quantity: | 2500 |
| Subcategory: | PMIC - Power Management ICs |
| Technology: | Si |
| Tradename: | ViPower |
| Unit Weight: | 387 mg |
♠ High-side driver with CurrentSense analog feedback for automotive applications
The device is a single channel high-side driver manufactured using ST proprietary VIPower® technology and housed in the Octapak package. The device is designed to drive 12 V automotive grounded loads through a 3 V and 5 V CMOS-compatible interface, providing protection and diagnostics.
The device integrates advanced protective functions such as load current limitation, overload active management by power limitation and overtemperature shutdown.
A sense enable pin allows OFF-state diagnosis to be disabled during the module low-power mode as well as external sense resistor sharing among similar devices.
■ AEC-Q100 qualified
■ General
– Single channel smart high-side driver with CurrentSense analog feedback
– Very low standby current
– Compatible with 3.0 V and 5 V CMOS outputs
■ Diagnostic functions
– Overload and short to ground (power limitation) indication
– Thermal shutdown indication
– OFF-state open-load detection
– Output short to VCC detection
– Sense enable/ disable
■ Protections
– Undervoltage shutdown
– Overvoltage clamp
– Load current limitation
– Self limiting of fast thermal transients
– Loss of ground and loss of VCC
– Reverse battery
– Electrostatic discharge protection
Specially intended for Automotive smart power distribution, glow plugs, heating systems, DC motors, relay replacement and high power resistive and inductive actuators.
