S9KEAZN64AVLCR ARM Microcontrollers – MCU KINETIS E SERIES 64K FLASH 4K RAM 40MHz 32LQFP

Short Description:

Manufacturers: NXP
Product Category: ARM Microcontrollers – MCU
Data Sheet: S9KEAZN64AVLCR
Description: ARM Microcontrollers – MCU KINETIS E SERIES 64K FLASH 4K RAM 40MHz 32LQFP
RoHS status: RoHS Compliant


Product Detail

Features

Product Tags

♠ Product Description

Product Attribute Attribute Value
Manufacturer: NXP
Product Category: ARM Microcontrollers - MCU
Series: KEA64
Mounting Style: SMD/SMT
Package / Case: LQFP-32
Core: ARM Cortex M0+
Program Memory Size: 64 kB
Data Bus Width: 32 bit
ADC Resolution: 12 bit
Maximum Clock Frequency: 40 MHz
Number of I/Os: 28 I/O
Data RAM Size: 4 kB
Supply Voltage - Min: 2.7 V
Supply Voltage - Max: 5.5 V
Minimum Operating Temperature: - 40 C
Maximum Operating Temperature: + 105 C
Packaging: Reel
Analog Supply Voltage: 2.7 V to 5.5 V
Brand: NXP Semiconductors
DAC Resolution: 6 bit
Data RAM Type: SRAM
Data ROM Size: 256 B
Data ROM Type: EEPROM
Interface Type: I2C, SPI, UART
Moisture Sensitive: Yes
Number of ADC Channels: 16 Channel
Product: MCU
Product Type: ARM Microcontrollers - MCU
Program Memory Type: Flash
Factory Pack Quantity: 2000
Subcategory: Microcontrollers - MCU
Watchdog Timers: Watchdog Timer
Part # Aliases: 935324986528

 


  • Previous:
  • Next:

  • • Operating characteristics
    – Voltage range: 2.7 to 5.5 V
    – Flash write voltage range: 2.7 to 5.5 V
    – Temperature range (ambient): -40 to 125°C
    • Performance
    – Up to 40 MHz Arm® Cortex-M0+ core and up to 20 MHz bus clock
    – Single cycle 32-bit x 32-bit multiplier
    – Single cycle I/O access port
    • Memories and memory interfaces
    – Up to 64 KB flash
    – Up to 256 B EEPROM
    – Up to 4 KB RAM
    • Clocks
    – Oscillator (OSC) – supports 32.768 kHz crystal or 4 MHz to 20 MHz crystal or ceramic resonator; choice of low power or high gain oscillators
    – Internal clock source (ICS) – internal FLL with internal or external reference, 31.25 kHz pretrimmed internal reference for 40 MHz system and core clock.
    – Internal 1 kHz low-power oscillator (LPO)
    • System peripherals
    – Power management module (PMC) with three power modes: Run, Wait, Stop
    – Low-voltage detection (LVD) with reset or interrupt, selectable trip points
    – Watchdog with independent clock source (WDOG)
    – Programmable cyclic redundancy check module (CRC)
    – Serial wire debug interface (SWD)
    – Bit manipulation engine (BME)
    • Security and integrity modules
    – 64-bit unique identification (ID) number per chip
    • Human-machine interface
    – Up to 57 general-purpose input/output (GPIO)
    – Up to 22 general-purpose input/output (GPIO)
    – Up to 14 general-purpose input/output (GPIO)
    – Two up to 8-bit keyboard interrupt modules (KBI)
    – External interrupt (IRQ)
    • Analog modules
    – One up to 16-channel 12-bit SAR ADC, operation in Stop mode, optional hardware trigger (ADC)
    – Two analog comparators containing a 6-bit DAC and programmable reference input (ACMP)
    • Timers
    – One 6-channel FlexTimer/PWM (FTM)
    – Two 2-channel FlexTimer/PWM (FTM)
    – One 2-channel periodic interrupt timer (PIT)
    – One real-time clock (RTC)
    • Communication interfaces
    – Two SPI modules (SPI)
    – Up to three UART modules (UART)
    – One I2C module (I2C)
    • Package options
    – 64-pin LQFP
    – 32-pin LQFP

    Related Products