STM32F427ZIT6 Integrated Circuits MCU 32B ARM Cortex-M4 2Mb Flash 168MHz CPU

Short Description:

Manufacturers: STMicroelectronics
Product Category: Embedded – Microcontrollers
Data Sheet: STM32F427ZIT6
Description: IC MCU 32BIT 2MB FLASH 144LQFP
RoHS status: RoHS Compliant


Product Detail

Features

Applications

Product Tags

♠ Product Description

Product Attribute Attribute Value
Manufacturer: STMicroelectronics
Product Category: ARM Microcontrollers - MCU
RoHS: Details
Series: STM32F427ZI
Mounting Style: SMD/SMT
Package / Case: LQFP-144
Core: ARM Cortex M4
Program Memory Size: 2 MB
Data Bus Width: 32 bit
ADC Resolution: 12 bit
Maximum Clock Frequency: 180 MHz
Number of I/Os: 114 I/O
Data RAM Size: 260 kB
Supply Voltage - Min: 1.7 V
Supply Voltage - Max: 3.6 V
Minimum Operating Temperature: - 40 C
Maximum Operating Temperature: + 85 C
Packaging: Tray
Analog Supply Voltage: 1.7 V to 3.6 V
Brand: STMicroelectronics
DAC Resolution: 12 bit
Data RAM Type: SRAM
Interface Type: CAN, I2C, SAI, SPI, UART/USART, USB
Length: 20 mm
Moisture Sensitive: Yes
Number of ADC Channels: 24 Channel
Number of Timers/Counters: 14 Timer
Processor Series: STM32F427
Product: MCU+FPU
Product Type: ARM Microcontrollers - MCU
Program Memory Type: Flash
Factory Pack Quantity: 360
Subcategory: Microcontrollers - MCU
Tradename: STM32
Watchdog Timers: Watchdog Timer
Unit Weight: 0.045518 oz

♠ 32b Arm® Cortex®-M4 MCU+FPU, 225DMIPS, up to 2MB Flash/256+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 20 com. interfaces, camera & LCD-TFT

The STM32F427xx and STM32F429xx devices are based on the high-performance Arm® Cortex®-M4 32-bit RISC core operating at a frequency of up to 180 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all Arm® singleprecision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.

The STM32F427xx and STM32F429xx devices incorporate high-speed embedded memories (Flash memory up to 2 Mbyte, up to 256 Kbytes of SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.

All devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers.

They also feature standard and advanced communication interfaces.

• Up to three I2Cs

• Six SPIs, two I2Ss full duplex. To achieve audio class accuracy, the I2S peripherals can be clocked via a dedicated internal audio PLL or via an external clock to allow synchronization.

• Four USARTs plus four UARTs

• An USB OTG full-speed and a USB OTG high-speed with full-speed capability (with the ULPI),

• Two CANs

• One SAI serial audio interface

• An SDIO/MMC interface

• Ethernet and camera interface

• LCD-TFT display controller

• Chrom-ART Accelerator™.

Advanced peripherals include an SDIO, a flexible memory control (FMC) interface, a camera interface for CMOS sensors. Refer to Table 2: STM32F427xx and STM32F429xx features and peripheral counts for the list of peripherals available on each part number.

The STM32F427xx and STM32F429xx devices operates in the –40 to +105 °C temperature range from a 1.7 to 3.6 V power supply.

The supply voltage can drop to 1.7 V with the use of an external power supply supervisor (refer to Section 3.17.2: Internal reset OFF). A comprehensive set of power-saving mode allows the design of low-power applications.

The STM32F427xx and STM32F429xx devices offer devices in 8 packages ranging from 100 pins to 216 pins. The set of included peripherals changes with the device chosen.


  • Previous:
  • Next:

  • • Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 180 MHz, MPU, 225 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions

    • Memories
    – Up to 2 MB of Flash memory organized into two banks allowing read-while-write
    – Up to 256+4 KB of SRAM including 64-KB of CCM (core coupled memory) data RAM
    – Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, Compact Flash/NOR/NAND memories

    • LCD parallel interface, 8080/6800 modes

    • LCD-TFT controller with fully programmable resolution (total width up to 4096 pixels, total height up to 2048 lines and pixel clock up to 83 MHz)

    • Chrom-ART Accelerator™ for enhanced graphic content creation (DMA2D)

    • Clock, reset and supply management
    – 1.7 V to 3.6 V application supply and I/Os
    – POR, PDR, PVD and BOR
    – 4-to-26 MHz crystal oscillator
    – Internal 16 MHz factory-trimmed RC (1% accuracy)
    – 32 kHz oscillator for RTC with calibration
    – Internal 32 kHz RC with calibration

    • Low power
    – Sleep, Stop and Standby modes
    – VBAT supply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM

    • 3×12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode

    • 2×12-bit D/A converters

    • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
    • Up to 17 timers: up to twelve 16-bit and two 32- bit timers up to 180 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input

    • Debug mode
    – SWD & JTAG interfaces
    – Cortex-M4 Trace Macrocell™

    • Up to 168 I/O ports with interrupt capability
    – Up to 164 fast I/Os up to 90 MHz
    – Up to 166 5 V-tolerant I/Os

    • Up to 21 communication interfaces
    – Up to 3 × I2C interfaces (SMBus/PMBus)
    – Up to 4 USARTs/4 UARTs (11.25 Mbit/s, ISO7816 interface, LIN, IrDA, modem control)
    – Up to 6 SPIs (45 Mbits/s), 2 with muxed full-duplex I2S for audio class accuracy via internal audio PLL or external clock
    – 1 x SAI (serial audio interface)
    – 2 × CAN (2.0B Active) and SDIO interface

    • Advanced connectivity
    – USB 2.0 full-speed device/host/OTG controller with on-chip PHY
    – USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated
    DMA, on-chip full-speed PHY and ULPI
    – 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII

    • 8- to 14-bit parallel camera interface up to 54 Mbytes/s

    • True random number generator

    • CRC calculation unit

    • RTC: subsecond accuracy, hardware calendar

    • 96-bit unique ID

    • Motor drive and application control

    • Medical equipment

    • Industrial applications: PLC, inverters, circuit breakers

    • Printers, and scanners

    • Alarm systems, video intercom, and HVAC

    • Home audio appliances

    Related Products