VND5T050AkTR-E Gate Drivers Double Ch High Side 24V 58Vcc 50mOhm
♠ Product Description
| Product Attribute | Attribute Value |
| Manufacturer: | STMicroelectronics |
| Product Category: | Gate Drivers |
| RoHS: | Details |
| Product: | MOSFET Gate Drivers |
| Type: | High-Side |
| Mounting Style: | SMD/SMT |
| Package / Case: | PowerSSO-24 |
| Number of Drivers: | 2 Driver |
| Number of Outputs: | 2 Output |
| Output Current: | 2 A |
| Supply Voltage - Min: | 8 V |
| Supply Voltage - Max: | 36 V |
| Minimum Operating Temperature: | - 40 C |
| Maximum Operating Temperature: | + 150 C |
| Series: | VND5T050AK-E |
| Qualification: | AEC-Q100 |
| Packaging: | Reel |
| Packaging: | Cut Tape |
| Packaging: | MouseReel |
| Brand: | STMicroelectronics |
| Maximum Turn-Off Delay Time: | 40 us |
| Maximum Turn-On Delay Time: | 30 us |
| Moisture Sensitive: | Yes |
| Operating Supply Current: | 4.2 mA |
| Operating Supply Voltage: | 24 V |
| Product Type: | Gate Drivers |
| Factory Pack Quantity: | 1000 |
| Subcategory: | PMIC - Power Management ICs |
| Technology: | Si |
| Unit Weight: | 0.016579 oz |
♠ Double channel high-side driver with analog current sense for 24 V automotive applications
The VND5T050AK-E is a monolithic device made using STMicroelectronics® VIPower® technology, intended for driving resistive or inductive loads with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes.
This device integrates an analog current sense which delivers a current proportional to the load current.
Fault conditions such as overload, overtemperature or short to VCC are reported via the current sense pin. Output current limitation protects the device in overload condition.
The device will latch off in case of overload or thermal shutdown.
The device is reset by a low level pass on the fault reset standby pin.
A permanent low level on the inputs and fault reset standby pin disable all outputs and set the device in standby mode.
• General
– Very low standby current
– 3.0 V CMOS compatible input
– Optimized electromagnetic emission
– Very low electromagnetic susceptibility
– Compliant with European directive 2002/95/EC
– Fault reset standby pin (FR_Stby)
• Diagnostic Functions
– Proportional load current sense
– High current sense precision for wide range currents
– Off-state open load detection
– Output short to VCC detection
– Overload and short to ground latch off
– Thermal shutdown latch-off
– Very low current sense leakage
• Protections
– Undervoltage shutdown
– Overvoltage clamp
– Load current limitation
– Self limiting of fast thermal transients
– Protection against loss of ground and loss of VCC
– Thermal shutdown
– Electrostatic discharge protection
• All types of resistive, inductive and capacitive loads
