STM32F103T8U7 ARM Microcontrollers MCU 32BIT Cortex M3 Performance LINE

Short Description:

Manufacturers: STMicroelectronics

Product Category: Embedded – Microcontrollers

Data Sheet: STM32F103T8U7

Description: IC MCU 32BIT 64KB FLASH 36VFQFPN

RoHS status: RoHS Compliant

 


Product Detail

Features

Product Tags

♠ Product Description

Product Attribute Attribute Value
Manufacturer: STMicroelectronics
Product Category: ARM Microcontrollers - MCU
RoHS: Details
Series: STM32F103T8
Mounting Style: SMD/SMT
Package / Case: UFQFPN-36
Core: ARM Cortex M3
Program Memory Size: 64 kB
Data Bus Width: 32 bit
ADC Resolution: 12 bit
Maximum Clock Frequency: 72 MHz
Number of I/Os: 26 I/O
Data RAM Size: 20 kB
Supply Voltage - Min: 2 V
Supply Voltage - Max: 3.6 V
Minimum Operating Temperature: - 40 C
Maximum Operating Temperature: + 105 C
Packaging: Tray
Brand: STMicroelectronics
Data RAM Type: SRAM
Height: 0.88 mm
Interface Type: CAN, I2C, SPI, USART, USB
Length: 6 mm
Moisture Sensitive: Yes
Number of ADC Channels: 10 Channel
Number of Timers/Counters: 4 Timer
Processor Series: ARM Cortex M
Product Type: ARM Microcontrollers - MCU
Program Memory Type: Flash
Factory Pack Quantity: 2940
Subcategory: Microcontrollers - MCU
Tradename: STM32
Width: 6 mm
Unit Weight: 0.003422 oz

 

♠ Medium-density performance line ARM®-based 32-bit MCU with 64 or 128 KB Flash, USB, CAN, 7 timers, 2 ADCs, 9 com. interfaces

The STM32F103xx medium-density performance line family incorporates the highperformance ARM® Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, highspeed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.

The devices operate from a 2.0 to 3.6 V power supply. They are available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications.

The STM32F103xx medium-density performance line family includes devices in six different package types: from 36 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of
peripherals proposed in this family.

These features make the STM32F103xx medium-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.


  • Previous:
  • Next:

  • • ARM® 32-bit Cortex®-M3 CPU Core
    – 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
    – Single-cycle multiplication and hardware division

    • Memories
    – 64 or 128 Kbytes of Flash memory
    – 20 Kbytes of SRAM

    • Clock, reset and supply management
    – 2.0 to 3.6 V application supply and I/Os
    – POR, PDR, and programmable voltage detector (PVD)
    – 4-to-16 MHz crystal oscillator
    – Internal 8 MHz factory-trimmed RC
    – Internal 40 kHz RC
    – PLL for CPU clock
    – 32 kHz oscillator for RTC with calibration

    • Low-power
    – Sleep, Stop and Standby modes
    – VBAT supply for RTC and backup registers

    • 2 x 12-bit, 1 µs A/D converters (up to 16 channels)
    – Conversion range: 0 to 3.6 V
    – Dual-sample and hold capability
    – Temperature sensor

    • DMA
    – 7-channel DMA controller
    – Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs

    • Up to 80 fast I/O ports
    – 26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant

    • Debug mode
    – Serial wire debug (SWD) & JTAG interfaces

    • 7 timers
    – Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and
    quadrature (incremental) encoder input
    – 16-bit, motor control PWM timer with deadtime generation and emergency stop
    – 2 watchdog timers (Independent and Window)
    – SysTick timer 24-bit downcounter

    • Up to 9 communication interfaces
    – Up to 2 x I2C interfaces (SMBus/PMBus)
    – Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
    – Up to 2 SPIs (18 Mbit/s)
    – CAN interface (2.0B Active)
    – USB 2.0 full-speed interface

    • CRC calculation unit, 96-bit unique ID

    • Packages are ECOPACK®

    Related Products