STM32F103VGT6TR ARM Microcontrollers MCU Mainstream Performance line Arm Cortex-M3 MCU 1 Mbyte of Flash 72MHz CPU moto

Short Description:

Manufacturers: STMicroelectronics
Product Category: Embedded – Microcontrollers
Data Sheet: STM32F103VGT6TR
Description: IC MCU 32BIT 1MB FLASH 100LQFP
RoHS status: RoHS Compliant


Product Detail

Features

Product Tags

♠ Product Description

Product Attribute Attribute Value
Manufacturer: STMicroelectronics
Product Category: ARM Microcontrollers - MCU
RoHS:  Details
Series: STM32F103VG
Mounting Style: SMD/SMT
Package / Case: LQFP-144
Core: ARM Cortex M3
Program Memory Size: 1 MB
Data Bus Width: 32 bit
ADC Resolution: 12 bit
Maximum Clock Frequency: 72 MHz
Number of I/Os: 112 I/O
Data RAM Size: 96 kB
Supply Voltage - Min: 2 V
Supply Voltage - Max: 3.6 V
Minimum Operating Temperature: - 40 C
Maximum Operating Temperature: + 85 C
Packaging: Reel
Packaging: Cut Tape
Brand: STMicroelectronics
Moisture Sensitive: Yes
Processor Series: ARM Cortex M
Product Type: ARM Microcontrollers - MCU
Factory Pack Quantity: 1000
Subcategory: Microcontrollers - MCU
Tradename: STM32
Unit Weight: 0.024037 oz

♠ XL-density performance line ARM®-based 32-bit MCU with 768 KB to 1 MB Flash, USB, CAN, 17 timers, 3 ADCs, 13 com. interfaces

The STM32F103xF and STM32F103xG performance line family incorporates the highperformance ARM® Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, highspeed embedded memories (Flash memory up to 1 Mbyte and SRAM up to 96 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, ten general-purpose 16-bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN.

The STM32F103xF/G XL-density performance line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.

These features make the STM32F103xF/G high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems and video intercom.


  • Previous:
  • Next:

  • • Core: ARM® 32-bit Cortex®-M3 CPU with MPU
    – 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
    – Single-cycle multiplication and hardware division

    • Memories
    – 768 Kbytes to 1 Mbyte of Flash memory
    – 96 Kbytes of SRAM
    – Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
    – LCD parallel interface, 8080/6800 modes

    • Clock, reset and supply management
    – 2.0 to 3.6 V application supply and I/Os
    – POR, PDR, and programmable voltage detector (PVD)
    – 4-to-16 MHz crystal oscillator
    – Internal 8 MHz factory-trimmed RC
    – Internal 40 kHz RC with calibration
    – 32 kHz oscillator for RTC with calibration

    • Low power
    – Sleep, Stop and Standby modes
    – VBAT supply for RTC and backup registers

    • 3 × 12-bit, 1 µs A/D converters (up to 21 channels)
    – Conversion range: 0 to 3.6 V
    – Triple-sample and hold capability
    – Temperature sensor

    • 2 × 12-bit D/A converters

    • DMA: 12-channel DMA controller
    – Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs

    • Debug mode
    – Serial wire debug (SWD) & JTAG interfaces
    – Cortex®-M3 Embedded Trace Macrocell™

    • Up to 112 fast I/O ports
    – 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant

    • Up to 17 timers
    – Up to ten 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
    – 2 × 16-bit motor control PWM timers with dead-time generation and emergency stop
    – 2 × watchdog timers (Independent and Window)
    – SysTick timer: a 24-bit downcounter
    – 2 × 16-bit basic timers to drive the DAC

    • Up to 13 communication interfaces
    – Up to 2 × I2C interfaces (SMBus/PMBus)
    – Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
    – Up to 3 SPIs (18 Mbit/s), 2 with I2S interface multiplexed
    – CAN interface (2.0B Active)
    – USB 2.0 full speed interface
    – SDIO interface

    • CRC calculation unit, 96-bit unique ID

    • ECOPACK® packages

    Related Products